pygame.draw — pygame v2.0.0.dev7 documentation

pygame.draw

pygame module for drawing shapes

pygame.draw.rect	—	draw a rectangle
pygame.draw.polygon	—	draw a polygon
pygame.draw.circle	—	draw a circle
pygame.draw.ellipse	—	draw an ellipse
pygame.draw.arc	—	draw an elliptical arc
pygame.draw.line	—	draw a straight line
pygame.draw.lines	—	draw multiple contiguous straight line segments
pygame.draw.aaline	—	draw a straight antialiased line
pygame.draw.aalines	—	draw multiple contiguous straight antialiased line segments

Draw several simple shapes to a surface. These functions will work for rendering to any format of surface. Rendering to hardware surfaces will be slower than regular software surfaces.

Most of the functions take a width argument to represent the size of stroke (thickness) around the edge of the shape. If a width of 0 is passed the shape will be filled (solid).

All the drawing functions respect the clip area for the surface and will be constrained to that area. The functions return a rectangle representing the bounding area of changed pixels. This bounding rectangle is the 'minimum' bounding box that encloses the affected area.

All the drawing functions accept a color argument that can be one of the following formats:

a pygame.Colorpygame object for color representations object

an (RGB) triplet (tuple/list)

an (RGBA) quadruplet (tuple/list)

an integer value that has been mapped to the surface's pixel format (see pygame.Surface.map_rgb()convert a color into a mapped color value and pygame.Surface.unmap_rgb()convert a mapped integer color value into a Color)

A color's alpha value will be written directly into the surface (if the surface contains pixel alphas), but the draw function will not draw transparently.

These functions temporarily lock the surface they are operating on. Many sequential drawing calls can be sped up by locking and unlocking the surface object around the draw calls (see pygame.Surface.lock()lock the Surface memory for pixel access and pygame.Surface.unlock()unlock the Surface memory from pixel access).

Note

See the pygame.gfxdrawpygame module for drawing shapes module for alternative draw methods.

pygame.draw.rect()¶

draw a rectangle
rect(surface, color, rect) -> Rect
rect(surface, color, rect, width=0, border_radius=0, border_radius=-1, border_top_left_radius=-1, border_top_right_radius=-1, border_bottom_left_radius=-1) -> Rect

Draws a rectangle on the given surface.

Parameters:	surface (Surface) -- surface to draw on color (Color or int or tuple(int, int, int, [int])) -- color to draw with, the alpha value is optional if using a tuple `(RGB[A])` rect (Rect) -- rectangle to draw, position and dimensions width (int) -- (optional) used for line thickness or to indicate that the rectangle is to be filled (not to be confused with the width value of the `rect` parameter) if `width == 0`, (default) fill the rectangle if `width > 0`, used for line thickness if `width < 0`, nothing will be drawn Note When using `width` values `> 1`, the edge lines will grow outside the original boundary of the rect. For more details on how the thickness for edge lines grow, refer to the `width` notes of the `pygame.draw.line()`draw a straight line function. border_radius (int) -- (optional) used for drawing rectangle with rounded corners. The supported range is [0, min(height, width) / 2], with 0 representing a rectangle without rounded corners. border_top_left_radius (int) -- (optional) used for setting the value of top left border. If you don't set this value, it will use the border_radius value. border_top_right_radius (int) -- (optional) used for setting the value of top right border. If you don't set this value, it will use the border_radius value. border_bottom_left_radius (int) -- (optional) used for setting the value of bottom left border. If you don't set this value, it will use the border_radius value. border_bottom_right_radius (int) -- (optional) used for setting the value of bottom right border. If you don't set this value, it will use the border_radius value. if `border_radius < 1` it will draw rectangle without rounded corners if any of border radii has the value `< 0` it will use value of the border_radius If sum of radii on the same side of the rectangle is greater than the rect size the radii will get scaled
Returns:	a rect bounding the changed pixels, if nothing is drawn the bounding rect's position will be the position of the given `rect` parameter and its width and height will be 0
Return type:	Rect

Note

The pygame.Surface.fill()fill Surface with a solid color method works just as well for drawing filled rectangles and can be hardware accelerated on some platforms with both software and hardware display modes.

Changed in pygame 2.0.0: Added support for keyword arguments.

pygame.draw.polygon()¶

draw a polygon
polygon(surface, color, points) -> Rect
polygon(surface, color, points, width=0) -> Rect

Draws a polygon on the given surface.

Parameters:	surface (Surface) -- surface to draw on color (Color or int or tuple(int, int, int, [int])) -- color to draw with, the alpha value is optional if using a tuple `(RGB[A])` points (tuple(coordinate) or list(coordinate)) -- a sequence of 3 or more (x, y) coordinates that make up the vertices of the polygon, each coordinate in the sequence must be a tuple/list/`pygame.math.Vector2`a 2-Dimensional Vector of 2 ints/floats, e.g. `[(x1, y1), (x2, y2), (x3, y3)]` width (int) -- (optional) used for line thickness or to indicate that the polygon is to be filled if width == 0, (default) fill the polygon if width > 0, used for line thickness if width < 0, nothing will be drawn Note When using `width` values `> 1`, the edge lines will grow outside the original boundary of the polygon. For more details on how the thickness for edge lines grow, refer to the `width` notes of the `pygame.draw.line()`draw a straight line function.
Returns:	a rect bounding the changed pixels, if nothing is drawn the bounding rect's position will be the position of the first point in the `points` parameter (float values will be truncated) and its width and height will be 0
Return type:	Rect
Raises:	ValueError -- if `len(points) < 3` (must have at least 3 points) TypeError -- if `points` is not a sequence or `points` does not contain number pairs

Note

For an aapolygon, use aalines() with closed=True.

Changed in pygame 2.0.0: Added support for keyword arguments.

pygame.draw.circle()¶

draw a circle
circle(surface, color, center, radius) -> Rect
circle(surface, color, center, radius, width=0, draw_top_right=None, draw_top_left=None, draw_bottom_left=None, draw_bottom_right=None) -> Rect

Draws a circle on the given surface.

Parameters:	surface (Surface) -- surface to draw on color (Color or int or tuple(int, int, int, [int])) -- color to draw with, the alpha value is optional if using a tuple `(RGB[A])` center (tuple(int or float, int or float) or list(int or float, int or float) or Vector2(int or float, int or float)) -- center point of the circle as a sequence of 2 ints/floats, e.g. `(x, y)` radius (int or float) -- radius of the circle, measured from the `center` parameter, nothing will be drawn if the `radius` is less than 1 width (int) -- (optional) used for line thickness or to indicate that the circle is to be filled if `width == 0`, (default) fill the circle if `width > 0`, used for line thickness if `width < 0`, nothing will be drawn Note When using `width` values `> 1`, the edge lines will only grow inward. draw_top_right (bool) -- (optional) if this is set to True it than the top right corner of the circle will be drawn draw_top_left (bool) -- (optional) if this is set to True it than the top left corner of the circle will be drawn draw_bottom_left (bool) -- (optional) if this is set to True it than the bottom left corner of the circle will be drawn draw_bottom_right (bool) -- (optional) if this is set to True it than the bottom right corner of the circle will be drawn if any of the draw_circle_part is True than it will draw all circle parts that have the True value, otherwise it will draw the entire circle.
Returns:	a rect bounding the changed pixels, if nothing is drawn the bounding rect's position will be the `center` parameter value (float values will be truncated) and its width and height will be 0
Return type:	Rect
Raises:	TypeError -- if `center` is not a sequence of two numbers TypeError -- if `radius` is not a number

Changed in pygame 2.0.0: Added support for keyword arguments. Nothing is drawn when the radius is 0 (a pixel at the center coordinates used to be drawn when the radius equaled 0). Floats, and Vector2 are accepted for the center param. The drawing algorithm was improved to look more like a circle.

pygame.draw.ellipse()¶

draw an ellipse
ellipse(surface, color, rect) -> Rect
ellipse(surface, color, rect, width=0) -> Rect

Draws an ellipse on the given surface.

Parameters:	surface (Surface) -- surface to draw on color (Color or int or tuple(int, int, int, [int])) -- color to draw with, the alpha value is optional if using a tuple `(RGB[A])` rect (Rect) -- rectangle to indicate the position and dimensions of the ellipse, the ellipse will be centered inside the rectangle and bounded by it width (int) -- (optional) used for line thickness or to indicate that the ellipse is to be filled (not to be confused with the width value of the `rect` parameter) if `width == 0`, (default) fill the ellipse if `width > 0`, used for line thickness if `width < 0`, nothing will be drawn Note When using `width` values `> 1`, the edge lines will only grow inward from the original boundary of the `rect` parameter.
Returns:	a rect bounding the changed pixels, if nothing is drawn the bounding rect's position will be the position of the given `rect` parameter and its width and height will be 0
Return type:	Rect

Changed in pygame 2.0.0: Added support for keyword arguments.

pygame.draw.arc()¶

draw an elliptical arc
arc(surface, color, rect, start_angle, stop_angle) -> Rect
arc(surface, color, rect, start_angle, stop_angle, width=1) -> Rect

Draws an elliptical arc on the given surface.

The two angle arguments are given in radians and indicate the start and stop positions of the arc. The arc is drawn in a counterclockwise direction from the start_angle to the stop_angle.

Parameters:	surface (Surface) -- surface to draw on color (Color or int or tuple(int, int, int, [int])) -- color to draw with, the alpha value is optional if using a tuple `(RGB[A])` rect (Rect) -- rectangle to indicate the position and dimensions of the ellipse which the arc will be based on, the ellipse will be centered inside the rectangle start_angle (float) -- start angle of the arc in radians stop_angle (float) -- stop angle of the arc in radians if `start_angle < stop_angle`, the arc is drawn in a counterclockwise direction from the `start_angle` to the `stop_angle` if `start_angle > stop_angle`, tau (tau == 2 * pi) will be added to the `stop_angle`, if the resulting stop angle value is greater than the `start_angle` the above `start_angle < stop_angle` case applies, otherwise nothing will be drawn if `start_angle == stop_angle`, nothing will be drawn width (int) -- (optional) used for line thickness (not to be confused with the width value of the `rect` parameter) if `width == 0`, nothing will be drawn if `width > 0`, (default is 1) used for line thickness if `width < 0`, same as `width == 0` Note When using `width` values `> 1`, the edge lines will only grow inward from the original boundary of the `rect` parameter.
Returns:	a rect bounding the changed pixels, if nothing is drawn the bounding rect's position will be the position of the given `rect` parameter and its width and height will be 0
Return type:	Rect

Changed in pygame 2.0.0: Added support for keyword arguments.

pygame.draw.line()¶

draw a straight line
line(surface, color, start_pos, end_pos, width) -> Rect
line(surface, color, start_pos, end_pos, width=1) -> Rect

Draws a straight line on the given surface. There are no endcaps. For thick lines the ends are squared off.

Parameters:	surface (Surface) -- surface to draw on color (Color or int or tuple(int, int, int, [int])) -- color to draw with, the alpha value is optional if using a tuple `(RGB[A])` start_pos (tuple(int or float, int or float) or list(int or float, int or float) or Vector2(int or float, int or float)) -- start position of the line, (x, y) end_pos (tuple(int or float, int or float) or list(int or float, int or float) or Vector2(int or float, int or float)) -- end position of the line, (x, y) width (int) -- (optional) used for line thickness if width >= 1, used for line thickness (default is 1) if width < 1, nothing will be drawn Note When using `width` values `> 1`, lines will grow as follows. For odd `width` values, the thickness of each line grows with the original line being in the center. For even `width` values, the thickness of each line grows with the original line being offset from the center (as there is no exact center line drawn). As a result, lines with a slope < 1 (horizontal-ish) will have 1 more pixel of thickness below the original line (in the y direction). Lines with a slope >= 1 (vertical-ish) will have 1 more pixel of thickness to the right of the original line (in the x direction).
Returns:	a rect bounding the changed pixels, if nothing is drawn the bounding rect's position will be the `start_pos` parameter value (float values will be truncated) and its width and height will be 0
Return type:	Rect
Raises:	TypeError -- if `start_pos` or `end_pos` is not a sequence of two numbers

Changed in pygame 2.0.0: Added support for keyword arguments.

pygame.draw.lines()¶

draw multiple contiguous straight line segments
lines(surface, color, closed, points) -> Rect
lines(surface, color, closed, points, width=1) -> Rect

Draws a sequence of contiguous straight lines on the given surface. There are no endcaps or miter joints. For thick lines the ends are squared off. Drawing thick lines with sharp corners can have undesired looking results.

Parameters:	surface (Surface) -- surface to draw on color (Color or int or tuple(int, int, int, [int])) -- color to draw with, the alpha value is optional if using a tuple `(RGB[A])` closed (bool) -- if `True` an additional line segment is drawn between the first and last points in the `points` sequence points (tuple(coordinate) or list(coordinate)) -- a sequence of 2 or more (x, y) coordinates, where each coordinate in the sequence must be a tuple/list/`pygame.math.Vector2`a 2-Dimensional Vector of 2 ints/floats and adjacent coordinates will be connected by a line segment, e.g. for the points `[(x1, y1), (x2, y2), (x3, y3)]` a line segment will be drawn from `(x1, y1)` to `(x2, y2)` and from `(x2, y2)` to `(x3, y3)`, additionally if the `closed` parameter is `True` another line segment will be drawn from `(x3, y3)` to `(x1, y1)` width (int) -- (optional) used for line thickness if width >= 1, used for line thickness (default is 1) if width < 1, nothing will be drawn Note When using `width` values `> 1` refer to the `width` notes of `line()` for details on how thick lines grow.
Returns:	a rect bounding the changed pixels, if nothing is drawn the bounding rect's position will be the position of the first point in the `points` parameter (float values will be truncated) and its width and height will be 0
Return type:	Rect
Raises:	ValueError -- if `len(points) < 2` (must have at least 2 points) TypeError -- if `points` is not a sequence or `points` does not contain number pairs

Changed in pygame 2.0.0: Added support for keyword arguments.

pygame.draw.aaline()¶

draw a straight antialiased line
aaline(surface, color, start_pos, end_pos) -> Rect
aaline(surface, color, start_pos, end_pos, blend=1) -> Rect

Draws a straight antialiased line on the given surface.

Parameters:	surface (Surface) -- surface to draw on color (Color or int or tuple(int, int, int, [int])) -- color to draw with, the alpha value is optional if using a tuple `(RGB[A])` start_pos (tuple(int or float, int or float) or list(int or float, int or float) or Vector2(int or float, int or float)) -- start position of the line, (x, y) end_pos (tuple(int or float, int or float) or list(int or float, int or float) or Vector2(int or float, int or float)) -- end position of the line, (x, y) blend (int) -- (optional) if non-zero (default) the line will be blended with the surface's existing pixel shades, otherwise it will overwrite them
Returns:	a rect bounding the changed pixels, if nothing is drawn the bounding rect's position will be the `start_pos` parameter value (float values will be truncated) and its width and height will be 0
Return type:	Rect
Raises:	TypeError -- if `start_pos` or `end_pos` is not a sequence of two numbers

Changed in pygame 2.0.0: Added support for keyword arguments.

pygame.draw.aalines()¶

draw multiple contiguous straight antialiased line segments
aalines(surface, color, closed, points) -> Rect
aalines(surface, color, closed, points, blend=1) -> Rect

Draws a sequence of contiguous straight antialiased lines on the given surface.

Parameters:	surface (Surface) -- surface to draw on color (Color or int or tuple(int, int, int, [int])) -- color to draw with, the alpha value is optional if using a tuple `(RGB[A])` closed (bool) -- if `True` an additional line segment is drawn between the first and last points in the `points` sequence points (tuple(coordinate) or list(coordinate)) -- a sequence of 2 or more (x, y) coordinates, where each coordinate in the sequence must be a tuple/list/`pygame.math.Vector2`a 2-Dimensional Vector of 2 ints/floats and adjacent coordinates will be connected by a line segment, e.g. for the points `[(x1, y1), (x2, y2), (x3, y3)]` a line segment will be drawn from `(x1, y1)` to `(x2, y2)` and from `(x2, y2)` to `(x3, y3)`, additionally if the `closed` parameter is `True` another line segment will be drawn from `(x3, y3)` to `(x1, y1)` blend (int) -- (optional) if non-zero (default) each line will be blended with the surface's existing pixel shades, otherwise the pixels will be overwritten
Returns:	a rect bounding the changed pixels, if nothing is drawn the bounding rect's position will be the position of the first point in the `points` parameter (float values will be truncated) and its width and height will be 0
Return type:	Rect
Raises:	ValueError -- if `len(points) < 2` (must have at least 2 points) TypeError -- if `points` is not a sequence or `points` does not contain number pairs

Changed in pygame 2.0.0: Added support for keyword arguments.

Example code for draw module.

# Import a library of functions called 'pygame'
import pygame
from math import pi
 
# Initialize the game engine
pygame.init()
 
# Define the colors we will use in RGB format
BLACK = (  0,   0,   0)
WHITE = (255, 255, 255)
BLUE =  (  0,   0, 255)
GREEN = (  0, 255,   0)
RED =   (255,   0,   0)
 
# Set the height and width of the screen
size = [400, 300]
screen = pygame.display.set_mode(size)
 
pygame.display.set_caption("Example code for the draw module")
 
#Loop until the user clicks the close button.
done = False
clock = pygame.time.Clock()
 
while not done:
 
    # This limits the while loop to a max of 10 times per second.
    # Leave this out and we will use all CPU we can.
    clock.tick(10)
     
    for event in pygame.event.get(): # User did something
        if event.type == pygame.QUIT: # If user clicked close
            done=True # Flag that we are done so we exit this loop
 
    # All drawing code happens after the for loop and but
    # inside the main while done==False loop.
     
    # Clear the screen and set the screen background
    screen.fill(WHITE)
 
    # Draw on the screen a GREEN line from (0, 0) to (50, 30) 
    # 5 pixels wide.
    pygame.draw.line(screen, GREEN, [0, 0], [50,30], 5)
 
    # Draw on the screen 3 BLACK lines, each 5 pixels wide.
    # The 'False' means the first and last points are not connected.
    pygame.draw.lines(screen, BLACK, False, [[0, 80], [50, 90], [200, 80], [220, 30]], 5)
    
    # Draw on the screen a GREEN line from (0, 50) to (50, 80) 
    # Because it is an antialiased line, it is 1 pixel wide.
    pygame.draw.aaline(screen, GREEN, [0, 50],[50, 80], True)

    # Draw a rectangle outline
    pygame.draw.rect(screen, BLACK, [75, 10, 50, 20], 2)
     
    # Draw a solid rectangle
    pygame.draw.rect(screen, BLACK, [150, 10, 50, 20])

    # Draw a rectangle with rounded corners
    pygame.draw.rect(screen, GREEN, [115, 210, 70, 40], 10, border_radius=15)
    pygame.draw.rect(screen, RED, [135, 260, 50, 30], 0, border_radius=10, border_top_left_radius=0,
                     border_bottom_right_radius=15)

    # Draw an ellipse outline, using a rectangle as the outside boundaries
    pygame.draw.ellipse(screen, RED, [225, 10, 50, 20], 2) 

    # Draw an solid ellipse, using a rectangle as the outside boundaries
    pygame.draw.ellipse(screen, RED, [300, 10, 50, 20]) 
 
    # This draws a triangle using the polygon command
    pygame.draw.polygon(screen, BLACK, [[100, 100], [0, 200], [200, 200]], 5)
  
    # Draw an arc as part of an ellipse. 
    # Use radians to determine what angle to draw.
    pygame.draw.arc(screen, BLACK,[210, 75, 150, 125], 0, pi/2, 2)
    pygame.draw.arc(screen, GREEN,[210, 75, 150, 125], pi/2, pi, 2)
    pygame.draw.arc(screen, BLUE, [210, 75, 150, 125], pi,3*pi/2, 2)
    pygame.draw.arc(screen, RED,  [210, 75, 150, 125], 3*pi/2, 2*pi, 2)
    
    # Draw a circle
    pygame.draw.circle(screen, BLUE, [60, 250], 40)

    # Draw only one circle quadrant
    pygame.draw.circle(screen, BLUE, [250, 250], 40, 0, draw_top_right=True)
    pygame.draw.circle(screen, RED, [250, 250], 40, 30, draw_top_left=True)
    pygame.draw.circle(screen, GREEN, [250, 250], 40, 20, draw_bottom_left=True)
    pygame.draw.circle(screen, BLACK, [250, 250], 40, 10, draw_bottom_right=True)

    # Go ahead and update the screen with what we've drawn.
    # This MUST happen after all the other drawing commands.
    pygame.display.flip()
 
# Be IDLE friendly
pygame.quit()

Edit on GitHub

pygame documentation